xstchntat
19-04-2011, 06:36 PM
Hen n Chicks Square motif ©2011 Rachael Mohler
http://www.intatters.com/attachment.php?attachmentid=10694&d=1303197175
This pattern was designed to practice the Single Shuttle Split Ring Alternative that I came up with. I used Lizbeth 20 Jellybean for this practice piece.
Single Shuttle Split Ring Alternative
1.Start the ring to the point you need the thread to exit the ring.
2.Pull the ring closed just to the length you need for the split part.
3.Use a crochet hook to make a join into the first stitch on the ring(only the side of the stitch that is closer to you, ie only one thread). Make sure you are not joining to the length of thread between the rings and make sure to re-tighten that first stitch after you do the join.(my ring I was doing backside tatting - you may have to adjust if you are tatting a front side ring)
4.Turn the ring over and use Dora Young knots to complete the ring. Make sure to pull them tight since you are working over 2 threads instead of 1.
Shown in a pattern the same as a split ring: example 4+4-4/4 would be 4 ds, join, 4 ds, picot, 4 ds, do the steps 1-4 as above with 4 Dora Young Knots.
A how to video can be found here:
http://s991.photobucket.com/albums/af39/xstchntat/Tatting/Demos/?action=view¤t=MVI_2002.mp4
Abbreviations
SSSRA - Single Shuttle Split Ring Alternative
sR - small Ring LR - Large Ring mR - medium Ring
Ch - Chain (not needed in this pattern
SP - space of bare thread
rw - reverse work
+ Join
- picot
ds - double stitch
DYN - Dora Young Knot
sp - leave a space of unworked thread
* to * - repeat the directions between * given number of times
LR. 5ds (-2ds)7 times, rw
NOTE=1st mR only - instead of +
*mR. sp 4ds + 4ds - 4ds - 4ds, rw (+ to last - previous mr)
sR. sp 5ds + 5ds, rw (+ to last - of previous LR)
SSSRA. sp 4ds + 4ds - 4ds/4DYN rw (+ to last - previous mR)
sR. sp 5ds - 5ds, rw
mR. sp 4ds + 4ds - 4ds - 4ds, rw (+ to free - previous SSSRA)
LR. sp 5ds + (2ds -) 6 times 5ds, rw (+ to - previous sR)*
Repeat from * to * 2 times
mR. sp 4ds + 4ds - 4ds - 4ds, rw (+ to last - previous mr)
sR. sp 5ds + 5ds, rw (+ to last - of previous LR)
SSSRA. sp 4ds + 4ds - 4ds/4DYN rw (+ to last - previous mR)
sR. sp 5ds - 5ds, rw
mR. sp 4ds + 4ds - 4ds - 4ds
Cut Tie Hide
I used the single shuttle split ring to hide the ends as described by PattyD and put into a pdf on Jane Eborall's site:
http://www.janeeborall.freeservers.com/SSSRjoin2way.pdf
10700
Would love to see other patterns using this ring technique.
http://www.intatters.com/attachment.php?attachmentid=10694&d=1303197175
This pattern was designed to practice the Single Shuttle Split Ring Alternative that I came up with. I used Lizbeth 20 Jellybean for this practice piece.
Single Shuttle Split Ring Alternative
1.Start the ring to the point you need the thread to exit the ring.
2.Pull the ring closed just to the length you need for the split part.
3.Use a crochet hook to make a join into the first stitch on the ring(only the side of the stitch that is closer to you, ie only one thread). Make sure you are not joining to the length of thread between the rings and make sure to re-tighten that first stitch after you do the join.(my ring I was doing backside tatting - you may have to adjust if you are tatting a front side ring)
4.Turn the ring over and use Dora Young knots to complete the ring. Make sure to pull them tight since you are working over 2 threads instead of 1.
Shown in a pattern the same as a split ring: example 4+4-4/4 would be 4 ds, join, 4 ds, picot, 4 ds, do the steps 1-4 as above with 4 Dora Young Knots.
A how to video can be found here:
http://s991.photobucket.com/albums/af39/xstchntat/Tatting/Demos/?action=view¤t=MVI_2002.mp4
Abbreviations
SSSRA - Single Shuttle Split Ring Alternative
sR - small Ring LR - Large Ring mR - medium Ring
Ch - Chain (not needed in this pattern
SP - space of bare thread
rw - reverse work
+ Join
- picot
ds - double stitch
DYN - Dora Young Knot
sp - leave a space of unworked thread
* to * - repeat the directions between * given number of times
LR. 5ds (-2ds)7 times, rw
NOTE=1st mR only - instead of +
*mR. sp 4ds + 4ds - 4ds - 4ds, rw (+ to last - previous mr)
sR. sp 5ds + 5ds, rw (+ to last - of previous LR)
SSSRA. sp 4ds + 4ds - 4ds/4DYN rw (+ to last - previous mR)
sR. sp 5ds - 5ds, rw
mR. sp 4ds + 4ds - 4ds - 4ds, rw (+ to free - previous SSSRA)
LR. sp 5ds + (2ds -) 6 times 5ds, rw (+ to - previous sR)*
Repeat from * to * 2 times
mR. sp 4ds + 4ds - 4ds - 4ds, rw (+ to last - previous mr)
sR. sp 5ds + 5ds, rw (+ to last - of previous LR)
SSSRA. sp 4ds + 4ds - 4ds/4DYN rw (+ to last - previous mR)
sR. sp 5ds - 5ds, rw
mR. sp 4ds + 4ds - 4ds - 4ds
Cut Tie Hide
I used the single shuttle split ring to hide the ends as described by PattyD and put into a pdf on Jane Eborall's site:
http://www.janeeborall.freeservers.com/SSSRjoin2way.pdf
10700
Would love to see other patterns using this ring technique.